Siphon
Heating moves water into an upper chamber; cooling draws the brew through the filter. Use only intact, heat-rated glass and the burner specified for your brewer.
- Ratio
- 1 : 15
- Temperature
- 90–96 °C
- Brew time
- 2 min 30 sec–4 min
- Grind
- medium

Before you brew
Weigh coffee and water before you begin. Use the recipe as a starting point, taste after cooling a little, then change one variable at a time. If the brew is harsh, try less agitation or a slightly coarser grind; if it is thin and sour, check your dose and try a finer grind.
What you’ll need
- Siphon
- Filter
- Approved heat source
- Scale
The brew at a glance
- 0:00–1:00
Fit the prepared filter and add water to the lower bowl. Heat using the approved burner.
- 1:00–1:10
When water has risen, lower the heat and add coffee. Stir gently to wet it.
- 1:10–2:30
Maintain gentle heat without a rolling boil. Keep the stand stable.
- 2:30–3:00
Remove heat and let cooling draw the brew down. The glass remains hot.
- 3:00
Separate the chambers only when safe to handle and serve.
Recipes for this method
Siphon: Everyday balance
Use 20 g coffee and 300 g water. Adjust the grind for your coffee and equipment.
RecipeSiphon: A different dose
Use 15 g coffee and 225 g water. Adjust the grind for your coffee and equipment.
RecipeSiphon: A gentle start
Use 25 g coffee and 375 g water. Adjust the grind for your coffee and equipment.
Find your balance.
A cup is the water you put in, not the finished drink. 1 mL water ≈ 1 g.
water
freshly ground coffee
1 : 15 · 0.9 cups